40″ x .110″ x 16,000 lb Rowe, Bradbury & Tishken Panel Rollforming Line
-
This complete line is no longer available as some component have been sold separately.
Manufacturer: Rowe, Bradbury & Tishken
Size / Capacity: 40″ x .110″ x 16,000 lb
Stock Number: 13355
-
18 stand Bradbury rollformer (more photos): Dual Head (Adjustable) Duplex Rollformer | With reverse & jog functions | Brake motor-gear reducer drive | Spindles mounted intapered roller bearings | Powered head traverse system – located from center in and out, preset locations through encoder and counter
16,000 lb x 40″ Rowe uncoiler (more photos): With Allen Bradley 1336 Plus II variable frequency drive | Powered drive & expansion | Pneumatic coil clamping | Gear reducers on main drive & expansion motors
SOLD 40″ x .110″ Rowe straightener (more photos): Allen Bradley MicroLogix 1000 PLC | 7-roll, 3 over 4 roll configuration
50 ton Tishken flying press (more photos) & 50 ton Tishken flying shear (more photos): Tooling not included | Pnematic | Double piston actuation | 4-post die head | Adjustable shut height | Lateral adjustment for lineup | Knockouts on stamping press | D.C. trip circuit | Production counter | Automatic trip | Air valves with muffler
Updated Operator Control Panel: Allen Bradley Panelview Plus 700 display | Allen Bradley Powerflex 700 variable frequency drive | Allen Bradley MicroLogix 1500 PLC
-
Rowe Uncoiler
*** Price: $24,500.00 ***
... Maximum coil weight
16,000 lbs.
... Maximum coil OD
60"
... Stock width
40"
... Speed
20 FPM / 3.5 RPM
... Air supply
120 PSI
... Power requirements, uncoiler
480V, 3PH, 60Hz
... Main drive motor
1.5 HP, 1745 RPM, 230/460V, 3PH, 60HZ, 4.6/2.3A
... Gear reducer on main drive
Ratio – 25
... Expansion motor
1.5 HP, 1745 RPM, 230/460V, 3PH, 60HZ, 4.6/2.3A
... Gear reducer on expansion motor
Ratio – 10; HP – 1.92; RPM – 1750
... Approximate dimensions, uncoiler
117" x 71" x 100" high (8,000 lbs)
Rowe straightener
*** Price: $9,750.00 ***
... Maximum width
41"
... Maximum thickness (mild steel)
0.110"
... Number of rolls
7
... Roll configuration
3 over 4
... Approximate dimensions, straightener
84" x 87" x 82" high (9,000 lbs)
Bradbury rollformer
*** Price: $89,500.00 ***
... Type
Dual head (adjustable) duplex rollformer
... Serial number (year)
14762 (1987)
... Number of forming stations
18
... Rollspace
14-1/2" to 48"
... Diameter of spindles
1-1/2"
... Vertical adjustment
4-1/2" to 4-3/8"
... Horizontal center distance
7"
... Rollspace each head
3-1/4"
... Passline height
42"
... Tooling gear ratio, bottom to top
1.5714 to 1
... Standard workspeed
80 FPM +/- 4 FPM
... Line direction
Left to right
... Motor
10 HP
... Power requirements, rollformer
480V / 3 PH / 60 Hz
... Approximate dimensions, rollformer
153" x 102" x 73" (25,000 lbs)
Tishken presses (2)
*** Price: $59,500 (Shear); $49,500 (Press)***
... Model number
AC0-S-50
... Serial numbers (year)
Press: 20202 (1989), Shear: 21854 (1997)
... Tonnage
50
... Distance between posts
49" x 21"
... Diameter of posts
3"
... Diameter of cylinder rods
3"
... Adjustable stroke range
1" to 3"
... Height from floor to die (adjustable)
33" to 38"
... (2) Knockouts in platen on stamping press
20" x 15"
... (1) Knockout in base on stamping press
20" x 37"
... Approximate weight, press & shear
11,000 lbs (each)
... Approximate dimensions
88"L x 60"W x 109"H (shear 41"W)
... Approximate dimensions with guards
91"L x 60"W x 138"H (shear 51"W)