12-1/2″ diameter hole through spindle

24″ 4-jaw chuck with 9-1/2″ hole

Bar stock support (rear)

Threading

Swing over bedways - 31-3/8"

Swing over cross slide - 24-1/2"

Spindle nose to turret face - 104"

Spindle speeds (12) - 11-275 RPM

Spindle nose - A1-20

Spindle bore diameter - 12-1/2"

Cross slide feeds - (16) 0.0025 to 0.088 IPR

Longitudinal & turret feeds - (16) 0.005 to 0.176 IPR

Threading - (90) 2 to 40 TPI

Cross slide turret travel - 14-1/2"

Chuck size - 24" (4-jaw)

Flange holders - 6

Motor - 30 HP

Motor speed - 1760 RPM

Volts - 230 / 460

Phase - 3

Cycle - 60

Amps - 76 / 38

Approximate dimensions - 203" x 93" x 72" high

Approximate weight - 21,000 lbs.