Newall NMS300 2-Axis digital readout system

6" 3-jaw chuck

8" 4-jaw chuck (new in box)

12" faceplate

4-way tool post

Steady rest

Full length rear splash guard

Foot brake

Thread dial

Swing over bedways — 14"(22) 7.5 to 0.45

Swing over cross slide — 8-1/2”

Distance between centers — 40”

Gap length — 9-1/2”

Cross slide travel — 6-1/8”

Compound slide travel — 3-5/8”

Spindle bore — 1-9/16”

Spindle speeds — 330-1800 RPM

Feeds — (40) 0.0011 to 0.0271 IPR

Inch threads — (40) 4 to 112 TPI

Metric threads — (22) 0.45 to 7.5

Z-axis handwheel graduations (inch) — 0.005”

Z-axis handwheel graduations (metric) — 0.1 mm

X-axis handwheel graduations (inch) — 0.001”

X-axis handwheel graduations (metric) — 0.02 mm

Compound slide graduations (inch) — 0.001”

Compound slide graduations (metric) — 0.02 mm

Tailstock handwheel graduations (inch) — 0.001”

Tailstock handwheel graduations (metric) — 0.02 mm

Bed width — 8”

Bed length — 54”

Leadscrew diameter (Z-axis) — 7/8”

Leadscrew pitch (Z-axis) — 8 TPI

Tailstock quill travel — 4-5/8” (118mm)

Tailstock quill diameter — 1.78”

Tailstock quill taper — #3MT

Motor — 3 HP

Volts — 220

Phase — 1

Frequency — 60 Hz

Current — 14.7 amps

Approximate dimensions — 72” x 30” x 62” high

Approximate weight — 2,200 lbs

This 14” x 40” Enco engine lathe is equipped with a 2-axis Newall digital readout, 3 & 4 jaw chucks, 4-way toolpost, 12” faceplate, foot brake and full length splash guard.

For questions or to schedule an inspection of this 14” x 40” Enco Engine Lathe, please call 515-999-2999 or email your request to sales@nsmachine.com. To request a quote for this 14” x 40” Enco Engine Lathe, use the “Request Quote” button on this page.