Electric / Hydraulic operation provides smooth, consistent pressing action.

Open sides to facilitate work on long pieces.

Flat ram nose can be easily changed to allow the user to adapt the press to a specific job.

Quality Baldor motor, low speed.

Low speed pump - quiet, dependable operation.

Self-locking table design eliminates lateral movement.

Double-acting cylinder permits pulling as well as pressing ram action.

Hydraulic power-lift for vertical displacement of table.

Pressure regulator to limit the ram pressure.

Cylinder activation is fingertip controlled, the more the hand lever is engaged the more the ram movement is accelerated. This allows the operator to control the proper speed for the task.

High capacity 20 GAL. hydraulic oil reservoir.

Low pressure hydraulic system maintains lower oil temperatures, resulting in higher efficiency and safer operation.

All hydraulic and mechanical parts are standard in the industry, and available throughout North America.

Front safety guard for operator protection.

FPS-250 Foot pedal-electric solenoid valve for hands-free operation, c/w electric control panel.

Tonnage - 250

Bore - 12”

Stroke — 16”

Rod — 5”

Advance speed — 17 IPM

Press speed — 4 IPM

Return speed — 21 IPM

Distance between side frames — 60”

Maximum open height — 32.5”

Maximum L-R travel — 27.75”

Oil reservoir capacity — 20 gallons

Motor — 20 HP

Volts — 480

Phase — 3

Approximate dimensions — 84" x 42" x 94" high

Approximate weight — 4,800 lbs.

This Press Master Hydraulic H-Frame Press is a model HFP-250. With a 10 HP motor and 20 gallon oil capacity, it has a pressing capacity of 250 tons.

For questions or to schedule an inspection of this Press Master HFP-250 Hydraulic H-Frame Press, please call 515-999-2999 or email your request to sales@nsmachine.com. To request a quote for this Press Master HFP-250 Hydraulic H-Frame Press, use the “Request Quote” button on this page.