50 Ton Piranha P-50 Hydraulic Ironworker
$15,500
-
Manufacturer: Piranha
Model Number: P-50
Stock Number: 3959
Model Year: 1993
Stock Number: 13846
-
This is the older style P50 which is comparable to the current P65 with an angle capacity of 5” x 5” x 3/8”.
50 ton punch station
3/4" rod shear (new blades)
5" x 5" x 3/8" angle shear
11" plate shear
Notching station
Foot pedal control
(2) joy stick controls
Cleaned, painted & cycled
-
Throat depth - 8”
Open height - 13-1/2”
Closed height w/o die block - 9-1/4”
Stroke length - 4-1/4”
Punch capacity - 50 tons
…material thickness - 13/16” through 3/4”
…strokes per minute - 60 @ 1/2”
…platen table size - 10” x 17”
Bar shear capacity, round - 1/4” to 1-1/2”
Bar shear capacity, square - 1/2” to 1”
Coper-notcher (56 tons) - 2-3/4” x 4” x 1/4”
Plate shear *(14-5/8”) - 3/4” x 10”, 5/8” x 14”
Angle shear, maximum - 5” x 5” x 3/8”
Hydraulic pump (10.5 GPM) - 2600 PSI, 18 gallons
Motor - 10 HP, 1800 RPM
Power requirements - 230/460 volts
Approximate dimensions - 24” x 66” x 60” high
Approximate weight - 2,600 lbs.
*With full length shear blades installed (not included)
-
This is the older style P50 which is comparable to the current P65 with an angle capacity of 5” x 5” x 3/8”.
This hydraulic ironworker has a 50 ton punch capable of punching up to 13/16” hole through ¾” thick mild steel. The angle shear has a maximum capacity of 5” x 5” x 3/8” angle iron. It is equipped with 3/4” round shear blades and 11” flat shear blades.
For questions or to schedule an inspection of this 50 ton Piranha P50 ironworker, please call 515-999-2999 or email your request to sales@nsmachine.com. To request a quote for this 50 ton Piranha P50 ironworker, use the “Request Quote” button on this page.