121 Ton Geka Hydracrop 110/A Ironworker

Dual operator ironworker

Original Paint

(2) independent cylinders

(2) foot pedal controls

(5) work stations

- Punch station

- Angle shear station

- Section shear station

- Flat bar shear station

- Coper station

Magnetic work light

Round/square bar knives for section shear station

Miscellaneous punch tooling

40" Electric "flip stop" for shearing stations

C-channel knives for section shear station (3", 4")

Pipe notching attachment (1-1/4")

Tonnage: 121 tons (110 metric)

Punch capacity: 1-1/2" through 3/4"

Punch throat depth: 12"

Punch stroke: 3"

Punch work table height: 45.5"

Angle shear capacity, 90 degrees: 6.5" x 6.5" x 1/2"

Angle shear capacity, 45 degrees: 3" x 3" x 5/16"

Flat bar shear capacity: 24" x 5/8"

Flat bar shear work table height: 38-1/2"

Round bar shear capacity: 2"

Square bar shear capacity: 2"

4" C-channel capacity: 4" x 5.4 lb/f

3" C-channel capacity: 3" x 4.1 lb/f

Coper capacity: 4" x 2" x 1/2"

Coper & flat shear stroke: 4.5"

Coper table work height: 38-1/4"

Motor: 7.4 HP (5.5 KW)

Volts: 240 / 480

Phase: 3

Cycles: 60

Amps: 21.2 / 10.6

Approximate dimensions: 78" X 35" X 77" high

Approximate weight: 5,500 lbs.

This 121 Geka Hydracrop 110/A Hydraulic Ironworker is a 2007 model in excellent condition with original paint. It features (2) hydraulic cylinders for simultaneous operation by (2) operators. Five (5) work stations include a punch, coper/notcher, angle shear, section shear and plate shear. It is equipped with a 40” electric “Flip Stop”, a 1-3/4” pipe notching attachment, C-channel section blades and miscellaneous punch tooling.

For questions or to schedule an inspection of this 121 Geka Hydracrop 110/A Hydraulic Ironworker, please call 515-999-2999 or email your request to sales@nsmachine.com. To request a quote for this 121 Geka Hydracrop 110/A Hydraulic Ironworker, use the “Request Quote” button on this page.