Additional information
| Controlled Axes' | 2 |
|---|---|
| Swing over bed | 14" (350 mm) |
| Turning Diameter x Work Length, Max. (Chuck Work) | 5.91" x 4.72" |
| Turning Diameter x Work Length, Max. (Shaft Work) | 5.91" x 9.84" |
| Spindle Diameter at Front Bearing | 3.15" |
| Spindle Bore | 1.77" |
| Spindle Nose | 5.51" |
| Carriage travel, maximum | 11.22" |
| Minimum Input Increment (Carriage) | 0.0001" |
| Cutting Feed Rate (Carriage) | 0.0001 – 40.0000 IPR |
| Rapid Traverse (Carriage) | 472 IPM |
| Cross-Slide Travel | 5.91 (5.51 + 0.4) |
| Minimum Input Increment (Cross-Slide) | 0.0001" |
| Cutting Feed Rate (Cross-Slide) | 0.0001 – 40.0000 IPM |
| Rapid Traverse (Cross-Slide) | 472 IPM |
| Number of Turret Positions | 8 |
| Size of OD Turning Tool | 3/4" x 3/4" |
| Size of ID Turning Tool | 1-1/4" |
| Length of Slideway | 25.4" |
| Width of Slideway | 16.54" |
| Diameter of tailstock quill | 2.17" |
| Taper of tailstock quill | #4 MT |
| Stroke of tailstock quill | 2.36" |
| Motor | 1.5 HP / 1690 RPM |
| Volts | 220 |
| Phase | 3 |
| Cycle | 60 |
| Amps | 4.9 |
| Approximate dimensions | 79" x 63" x 66" high |
| Approximate weight | 5,500 lbs |
