20" x 25" Marvel vertical bandsaw Model E2125
20" x 25" Marvel vertical bandsaw Model E2125 20" x 25" Marvel vertical bandsaw Model E2125 | 13538-2 20" x 25" Marvel vertical bandsaw Model E2125 | 13538-3 20" x 25" Marvel vertical bandsaw Model E2125 | 13538-4 20" x 25" Marvel vertical bandsaw Model E2125 | 13538-5 20" x 25" Marvel vertical bandsaw Model E2125 | 13538-6 20" x 25" Marvel vertical bandsaw Model E2125 | 13538-7 20" x 25" Marvel vertical bandsaw Model E2125 | 13538-8 20" x 25" Marvel vertical bandsaw Model E2125 | 13538-9

20″ x 25″ Marvel Vertical Band Saw | 60° Power Tilt | 2006 Model E2125-PC60

$49,950.00

* Additional video below in the Description tab

Manufacturer:  Marvel
Model Number:  E2125-PC60
Serial Number:  E2125-2022PC
Model Year:  2006
Size / Capacity:  20″ x 25″
Category:  Saw, Band, Vertical
Stock Number:  13538

Features: 

  • Marvel PCII programmable control with digital readout
  • Direct drive tilt encoder
  • 60° tilting head, left & right
  • 3° Canted head for increased cutting rate & longer blade life
  • Automatic hydraulic feed system
  • Hydraulic vises (4)
  • Linear guide system
  • Infeed & outfeed roller conveyors
  • Powered chip conveyor
  • Under power

1 in stock

Description

 

* Operation demo with explanation of controls and features

Additional information

Capacity, rounds @ 0°

20.00" (508 mm)

Capacity, rounds @ 45°

17.00" (432 mm)

Capacity, rounds @ 90°

11.25" (286 mm)

Capacity, rectangles @ 0°

20.00" x 25.00" (508 mm x 635 mm)

Capacity, rectangles @ 45°

20.00" x 17.00" (508 mm x 432 mm)

Capacity, rectangles @ 90°

20.00" x 11.25" (508 mm x 286 mm)

Blade size

1.25" x 0.042" x 17' 6"

Blade speeds, variable

50 to 475 FPM

Feed force

0-350 lbs

Band wheel diameter

23.00"

Head tilt, right and left

60 degrees

Table load capacity

8,000 lbs.

Maximum vise opening

20.25"

Working height

38.00"

Feed table load capacity

14,000 lbs.

Feed table shuttle stroke

24.00"

Hydraulic reservoir capacity

10 gallons

Hydraulic system drive motor

3 HP

Hydraulic pump capacity

7.8 GPM

Coolant tank capacity

60 gallons

Coolant system drive motor

0.25 HP

Drive motor

5 HP

Volts

460

Phase

3

Cycles

60

Full load amps

15.8

Largest motor F.L.A.

7.6

Footprint

129" x 150"

Dimensions of saw

80" x 130" x 90" high

Dimensions of shuttle

92" x 82" x 52" high

Dimensions of exit conveyors (2 each)

120" x 38" x 24" (2 each)

Dimensions of infeed conveyor

80" x 38" x 24"