Browse our newest and most popular listings of used machinery, machine tools and metal fabricating equipment.

9" x 42" Bridgeport Series 1 Vertical Mill | 13718-1

9″ x 42″ Bridgeport Knee Type Vertical Mill | Series I

$11,500.00

From Trade School. Well Equipped!

Manufacturer: Bridgeport
Model Number: Series I
Size / Capacity: 9″ x 42″
Category: Mill, Vertical
Stock Number: 13718

Features:

  • AcuRite 2-axis digital readout system
  • Variable speed spindle with power downfeed
  • Bridgeport power longitudinal table feed with rapid traverse
  • Kurt swivel-base vise
  • Bijur lubrication system
  • Collets


This mill came from a vocation training facility and was not used for production work. 

9" x 42" Bridgeport Series 1 Vertical Mill | 13717-1

9″ x 42″ Bridgeport Knee Type Vertical Mill | Series I

$11,500.00

From Trade School. Well Equipped!

Manufacturer: Bridgeport
Model Number: Series I
Serial Number: 245595
Model Year: 1984
Size / Capacity: 9″ x 42″
Category: Mill, Vertical
Stock Number: 13717

Features:

  • AcuRite 2-axis digital readout system
  • Variable speed spindle with power downfeed
  • Servo power longitudinal table feed with rapid traverse
  • Kurt swivel-base vise
  • Bijur lubrication system
  • Collets


This mill came from a vocation training facility and was not used for production work. 

Fadal VMC 2016L Machining Center | 13726-1

20″ x 16″ x 20″ Fadal Vertical Machining Center | 2002 Model VMC 2016L

$16,950.00

Mint Condition! From Trade School

Manufacturer: Fadal
Model Number: VMC 2016L
Serial Number: 012002013050
Model Year: 2002
Size / Capacity: 20″ x 16″ x 20″
Category: Machining Center, Vertical
Stock Number: 13726

Features:

  • Fadal CNC control
  • 7500 RPM spindle
  • 21 position automatic tool changer
  • Miscellaneous tooling
  • Full enclosure
  • Coolant 

This machining center came from a vocation training facility and was not used for production work.

13" x 40" Clausing Colchester Engine Lathe | 13724-1

13″ x 40″ Clausing Colchester Engine Lathe

$6,950.00

Manufacturer: Clausing Colchester
Model Number: 13″
Size / Capacity: 13″ x 40″
Category: Lathe, Engine
Stock Number: 13724

Features:

  • 3-jaw chuck
  • Quick change toolpost
  • Coolant
  • Thread dial
  • Foot brake

This lathe came from a vocation training facility and was not used for production work.

14" x 40" Acer Gap Bed Engine lathe | 13721-1

14″/20″ x 40″ Acer Gap Bed Engine Lathe | Model 1440V E-Lathe

$7,950.00

Excellent Condition! Well Equipped!

Manufacturer: Acer
Model Number: 1440V, E-Lathe
Size / Capacity: 14″/20″ x 40″
Category: Lathe, Engine, Gap Bed
Stock Number: 13721

Features:

  • Newall E70-CSS 2-axis digital readout
  • Variable speed spindle drive
  • 3-jaw chuck
  • Chuck guard
  • 4-way toolpost
  • Faceplate
  • Steady rest
  • Follow rest
  • Foot brake
  • Work light
  • Coolant system

This lathe came from a vocation training facility and was not used for production work.

9" x 42" Bridgeport Series 1 Vertical Mill | 13716-1

9″ x 42″ Bridgeport Knee Type Vertical Mill | Series I

$11,500.00

Manufacturer: Bridgeport
Model Number: Series I
Serial Number: 245993
Model Year: 1985
Size / Capacity: 9″ x 42″
Category: Mill, Vertical
Stock Number: 13716

Features:

  • 2-axis digital readout system
  • Variable speed spindle with power downfeed
  • Bridgeport power longitudinal table feed with rapid traverse
  • Kurt swivel-base vise
  • Lubrication system
  • Collets


This mill came from a vocation training facility and was not used for production work. Very good condition and well equipped.

9" x 42" Bridgeport Series 1 Vertical Mill | 13719-1

9″ x 42″ Bridgeport Vertical Mill | Series I

$12,500.00

Manufacturer: Bridgeport
Model Number: Series I
Size / Capacity: 9″ x 42″
Category: Mill, Vertical, Knee Type
Stock Number: 13719

Features:

  • 2-axis digital readout system
  • Variable speed spindle with power downfeed
  • Power draw bar
  • Bridgeport power longitudinal table feed with rapid traverse
  • Kurt swivel-base vise
  • Bijur Lubrication system
  • Collets

This mill came from a vocation training facility and was not used for production work. Very good condition and well equipped.

P90 Piranha 50 ton Hydraulic Ironworker | 13712-4

90 ton Piranha Hydraulic Ironworker | 2016 Model P50

$27,500.00

Like New!!

Manufacturer: Piranha
Model Number: P90
Serial Number: PO-3565
Model Year: 2016
Size / Capacity: 90 ton
Category: Ironworker, Hydraulic
Stock Number: 13712

Features:

  • (2) Joystick controls
  • Foot pedal control
  • Punch tooling
  • 5′ shearing backgauge
  • 10′ infeed roller conveyors for flat & angle shear, (2) 5′ sections
  • 10′ punch table extension
  • Punch table gauging
  • Chip buckets
  • Original paint*

New machine price as equipped: $38,565

*Some of the yellow attachments have been repainted. All paint on ironworker is original.

Used Plate Roll For Sale: 10' x 1/2" Roundo PS255 | 13677-1

10′ x 1/2″ Roundo Hydraulic Plate Bending Roll | Model PS-255/10

$44,500.00

UNDER POWER !!

Manufacturer: Roundo
Model Number: PS-255/10
Serial Number: 976680
Model Year: 1997
Size / Capacity: 10′ x 1/2″
Category: Roll, Plate Bending, Double Initial Pinch
Stock Number: 13677

Features:

  • Double initial pinch
  • Hydraulic roll drive
  • Hydraulic roll positioning
  • Hydrauilc drop end
  • Wire encoders for roll positioning
  • Pedestal control station includes: 
    • Heavy duty stand with casters
    • (4) Joystick controls
    • (4) Digital roll position indicators
    • Quick disconnect
    • Emergency stop button
    • Push-pull style Stop/Start button
  • Emergency stop safety switches & cables – front and back
  • Emergency stop buttons on machine – front and back
130 ton Accurpress 713012 Hydraulic CNC Press Brake | 13688-1

130 ton Accurpress Hydraulic CNC Press Brake | Model 713012

$31,950.00

UNDER POWER !!

Manufacturer: Accurpress
Model Number: 713012
Serial Number: 492
Model Year: 1983
Size / Capacity: 130 ton
Category: Brake, Press, Hydraulic CNC
Stock Number: 13688

Features:

  • 2-axis Hurco Autobend 7 CNC control
  • Foot pedal control
2014 Camman 15KVA Metal Disintegrator C-27 SSQA | 13630-1

15 KVA Cammann Metal Disintegrator (Tap Burner) | 2014 Model C-27 SQSS

$12,950.00

Manufacturer: Cammann
Model Number: C-27 SQSS
Serial Number: 200214
Model Year: 2014
Size / Capacity: 15 KVA
Category: Metal Disintegrator (Tap Burner)
Stock Number: 13630

Features:

  • Designed for quick, accurate disintegration of broken tools in a shop facility
  • Rugged 8 motion, all angle, 4 axis 360 degree rotation
  • Automatic disintegration, complete and ready to operate with Cammamatic feed and auto depth shutoff
  • Cammamattic feed prevents skewing of electrode
  • Heavy duty 15 KVA power supply with Cammann built thermal overload protection transformers
  • Rugged 1-3/4″ thick precision ground steel worktable with tooling plate design for securing work piece
  • Heavy duty 12 gauge sheet metal cabinet
2000 CFM Donaldson Torit DB-2000 Downdraft Bench Dust Collector | 13648-1

2000 CFM Donaldson Torit Downdraft Bench Dust Collector | 2008 Model DB-2000

$7,950.00

Manufacturer: Donaldson-Torit
Model Number: DB-2000
Serial Number: 2654726-1
Model Year: 2008
Size / Capacity: 2000 CFM
Category: Dust Collector, Downdraft Bench
Stock Number: 13648

Features:

  • 52″ x 52″ downdraft & grinding table
  • Self contained dust collector
  • Automatic self-cleaning pulse jet system
  • Quiet, efficient backward inclined airfoil fan
  • Large capacity dust drawers
  • Fluorescent light fixture
1250 CFM Donaldson-Torit Mist Collector WSO 25-1 | 13699-1

1250 CFM Donaldson Torit Water, Smoke & Oil Mist Collector | 2010 Model WSO 25-1

$6,850.00

Manufacturer: Donaldson-Torit
Model Number: WSO 25-1
Serial Number: 32711984
Model Year: 2010
Size / Capacity: 1250 CFM, 3 HP
Category: Mist Collector
Stock Number: 13699

Currently Equipped With:

  • Wire mesh PreFilter (1st stage)
  • Donaldson Synteq XP oil-mist filter (2nd stage)

* Based on clean filters. CFM will vary based on external static pressure and the use of final filter.

** Published dB(A) sound pressure levels were made in a hemi-anechoic chamber. Units were run with clean filters and maximum airflow through approximately 10 feet (3 meters) of ducting connected to an inlet plenum. Measurements were made 1.5 meters off the ground, 1 meter away from the collector, on the filter door side of the mist collector. Actual installed equipment sound pressure levels will vary depending upon the measurement location, the operating conditions, the installation, and the surrounding environment.

11" x 58" Bridgeport Series II Vertical Milling Machine | 13658-1

11” x 58” Bridgeport Knee Type Vertical Mill | Series II

$9,950.00

Manufacturer: Bridgeport
Model Number: Series II
Serial Number: 7456
Size / Capacity: 11″ x 58″
Category: Mill, Vertical
Stock Number: 13658

Features:

  • 2-Axis Acu-Rite Digital Readout (X & Y)
  • Power feeds & Rapid traverse on (X, Y and knee)
  • Power downfeed
24" x 60" Mori-Seiki Metal Lathe For Sale | 13633-1

24″ x 60″ Mori Seiki Engine Lathe | Model MH-1500

$19,950.00

Manufacturer: Mori-Seiki
Model Number: MH-1500
Serial Number: 3591
Size / Capacity: 24″ x 60″
Category: Lathe, Engine
Stock Number: 13633

Features:

  • Digital readout
  • 15″ 3-jaw chuck with 4″ hole
  • 4-way toolpost
  • Work light
  • Coolant
  • Foot brake
14" x 40" JMT Metal Lathe | 13544-1

14” x 40” JMT Engine Lathe | Model JMT 360×1000

$5,950.00

Manufacturer: JMT
Model Number: JMT 360×1000
Serial Number: T4099412
Size / Capacity: 14″ x 40″
Category: Lathe, Engine
Stock Number: 13544

Features:

  • 3-jaw chuck (8″ diameter)
  • 4-jaw chuck (10″ diameter)
  • Quick change toolpost holder
  • Full length rear splash guard
  • Coolant
  • Chip pan
  • Chuck guard
  • Thread dial
  • Work light
Used Metal Lathe For Sale: 20" x 54" Hendey | 13636-2

20″ x 54″ Hendey Metal Lathe | Model 2013-54

$9,950.00

Manufacturer: Hendey
Model Number: 2013-54
Serial Number: 14
Size / Capacity: 20″ x 54″
Category: Lathes, Engine”
Stock Number: 13636

Features:

  • 15″ 3-jaw chuck (with 4″ bore)
  • Steady rest
  • Quick change tool post
  • Taper attachment
  • Thread dial
  • Carriage stop
  • Chuck guard
  • Coolant system
  • Chip pan
  • Work light
34" x 96" Axelson Metal Lathe | 13641-1

34″ x 96″ Axelson Engine Lathe | Model 32

$14,950.00

Manufacturer: Axelson
Model Number: 32″
Serial Number: 3701
Size / Capacity: 34″ x 96″
Category: Lathes, Engine
Stock Number: 13641

Features:

  • 31″ 4-jaw chuck
  • Chuck guard
  • Quick change tool post
  • Thread dial
  • Work light
  • Coolant
48" x 96" Shop Sabre Sidekick 8 CNC Plasma Table | 13696-1

48″ x 96″ Shop Sabre Sidekick 8 CNC Plasma Table | 2019

Like New – Less than 50 hours !!

Manufacturer:  Shop Sabre
Model Number:  Sidekick 8
Model Year:  2019
Size / Capacity:  48″ x 96″
Category:  Plasma Cutting System, CNC
Stock Number:  13696

Features:

  • 3″ deep water table with replaceable slats
  • 85 amp Hypertherm plasma
  • Programmable drilling head
  • Computer 
  • Monitor 
  • Computer stand

 

40" Kysor Johnson Vertical Bandsaw KVH-40 | 13689-1

40″ Kysor Johnson Vertical Band Saw | Model KVH-40

$9,500.00

Manufacturer: Kysor-Johnson
Model Number: KVH-40
Size / Capacity: 40″
Category: Saw, Band, Vertical
Stock Number: 13689

Features:

  • Hydraulic Power Table Feed
  • Tilting Table
  • Blade Welder
  • Blade Grinder
  • Blade Tension Indicator
  • Circle sawing device
  • Air Blowoff
  • Work Light
8 Stand Hat & Z Channel Rollforming Line | 13596-1

8-Stand Hat & Z-Channel Rollforming Line

$25,000.00

Size / Capacity: 8 stand
Category: Rollforming Line, Hat & Z-Channel
Stock Number: 13596

Features:

  • 2,500 lb American Steelline decoiler
  • 8-stand rollformer
  • Airam cutoff press
  • Tooling for Hat & Z-Channel
12 stand Panel Rollforming Line | 13595-1

12-Stand Delta Panel Rollforming Line

$29,500.00

Manufacturer: American Steeline, Airam
Size / Capacity: 12 stand
Category: Rollforming Line, Panel
Stock Number: 13595

Features:

  • 10,000 lb American Steelline decoiler
  • 12-stand rollformer
  • Airam cutoff press
  • Tooling
3/8" x 10' American Hercules Hydraulic Shear | 13529-1

3/8″ x 10′ American Hercules Hydraulic Shear

$19,950.00

Manufacturer: American Hercules
Size / Capacity: 3/8″ x 10′
Category: Shear, Power Squaring, Hydraulic
Stock Number: 13529

Features:

  • Front operated power back gauge
  • Floor standing
  • Squaring arm
  • (2) front sheet support arms
  • Foot pedal control
  • Finger guard
  • Extra blades
11" x 54" Lagun Vertical Milling Machine FT.4 | 13603-1

11″ x 54″ Lagun Vertical Milling Machine | Model FT.4

$11,950.00

Manufacturer: Lagun
Model Number: FT.4
Size / Capacity: 11″ x 54″
Category: Mill, Vertical Knee
Stock Number: 13603

Features:

  • Anilam 2-axis digital readout
  • Power knee travel
  • Power longitudinal table feed
  • Power cross travel of saddle
17-3/4" x 88-1/2" OKK Vertical Bed Mill #MH-5VJ | 13628-1

17-3/4″ x 88-1/2″ OKK Vertical Bed Mill | Model MH-5VJ

$19,950.00

Manufacturer: OKK
Model Number: MH-5VJ
Serial Number: 844
Size / Capacity: 17-3/4″ x 88-1/2″
Category: Mill, Vertical Bed
Stock Number: 13628

Features:

  • Power drawbar
  • Auto lubrication system
  • Coolant
  • (2) work lights
  • Air Hook up
4' x 13" Ooya Radial Arm Drill RE2-1300 | 13549-1

4′ x 13″ Ooya Radial Arm Drill | RE2-1300

$7,995.00

Manufacturer:  Ooya
Model Number:  RE2-1300
Serial Number:  69-9597
Size / Capacity:  4′ x 13″
Category:  Drill, Radial Arm
Stock Number:  13549

Features:

  • Power elevation
  • Power clamping
  • Box table
  • Coolant
6" x 12" ELB Surface Grinder, SW3HA | 13568-1

6″ x 12″ Elb Reciprocating Table Surface Grinder | SW3HA

$4,950.00

Manufacturer:  Elb
Model Number:  SW3HA
Serial Number:  96521270
Size / Capacity:  6″ x 12″
Category:  Grinder, Surface, Horizontal Spindle
Stock Number:  13568

Features:

  • Reciprocating table
  • Horizontal spindle
  • Walker electromagnetic chuck
  • Neutrol Neutrifier
  • Dust collector
37" Timesaver 137-1HDMW Wet Belt Grinder | 13545-1

37″ Timesavers Wet Belt Grinder | Model 137-1HDMW

$17,500.00

Manufacturer:  Timesavers
Model Number:  137-1HDMW
Serial Number:  1998454
Size / Capacity:  37″
Category:  Grinder, Wet Belt
Stock Number:  13545

Features:

  • Paper filter coolant system
  • Air knife dryer
  • Load meter
  • Emergency Stop

No. 9 Blue Valley Flanger, 1″ capacity

Under Power on our Floor!!

Manufacturer:  Blue Valley
Model Number:  No. 9
Serial Number:  1288
Model Year:  1988
Size / Capacity:  1″
Category:  Flanger
Stock Number:  13540

Features:

  • NEW variable frequency drive
  • Loaded with tooling
  • Under power on our floor